A backyard ring toss game is a fun and easy project for beginner woodworkers. It’s a great addition to any backyard party, and it’s also an excellent game for kids to play. This game is simple to build, and you can customize it to your liking. In this article, we’ll go over the steps needed to build a backyard ring toss game.
Materials Needed:
- 2 pieces of 2×4 lumber, 8 feet long
- 1 piece of 2×2 lumber, 8 feet long
- 3-inch screws
- Wood glue
- Sandpaper
- Paint or stain (optional)
- Rope
- 8 metal rings (can be found at most hardware or home improvement stores)
Step 1: Cut the lumber
Using a circular saw or a miter saw, cut the 2×4 lumber into the following pieces:
- 4 pieces that are 23 inches long
- 2 pieces that are 36 inches long
Then, cut the 2×2 lumber into the following pieces:
- 2 pieces that are 24 inches long
Step 2: Assemble the base
Take the 4 pieces of 2×4 lumber that are 23 inches long, and lay them out on a flat surface to form a square. Use wood glue and 3-inch screws to attach the corners. Then, attach the 2 pieces of 2×2 lumber to the inside corners of the base using wood glue and screws. This will provide additional support for the base.
Step 3: Attach the legs
Take the 2 pieces of 2×4 lumber that are 36 inches long and attach them to opposite sides of the base using wood glue and screws. These will be the legs of the ring toss game. Make sure they are attached at a 90-degree angle to the base to provide stability.
Step 4: Sand and finish the wood
Sand all of the wood pieces using sandpaper to create a smooth surface. You can also paint or stain the wood if desired.
Step 5: Add the rope and rings
Cut a length of rope to your desired length (approximately 10 feet), and tie one end to one of the legs. Thread the other end of the rope through one of the rings and tie it securely. Repeat this process with the remaining rings and legs, spacing them out evenly.
Step 6: Play the game!
To play the game, stand back from the ring toss game and try to toss the rings onto the legs. The goal is to get the rings to land around the legs. Keep score, and the person with the most points at the end of the game wins.
Tips for Success:
- Use high-quality lumber to ensure the stability and durability of the game.
- Sand the edges and corners of the wood to avoid any sharp edges.
- Use wood glue and screws to attach the pieces together for added stability.
- Be sure to space out the rings evenly to make the game fair.
- Consider painting or staining the game to match your backyard decor.
In conclusion, building a backyard ring toss game is a fun and easy project for beginner woodworkers. With just a few materials and some basic tools, you can create a game that will provide hours of entertainment for family and friends. Customizable and inexpensive, this project is a great addition to any backyard or outdoor space.