If you’re a woodworking enthusiast or just looking for a fun project, building a wooden napkin holder can be a great DIY project. Not only is it functional, but it can also add a touch of rustic charm to your dining room or kitchen.
To get started, you’ll need a few basic tools and materials:
Materials:
- Wood plank
- Sandpaper
- Wood glue
- Finishing oil or stain
- Napkins
Tools:
- Table saw or circular saw
- Miter saw or hand saw
- Wood chisel
- Clamps
- Drill
- Router
Step 1: Cut your wood plank to size
Start by measuring and cutting your wood plank to the desired size. A standard napkin size is 6.5 inches by 6.5 inches, so you’ll want to make sure your napkin holder is slightly larger than that to accommodate the napkins. A good size for a napkin holder is around 8 inches by 8 inches.
Step 2: Create a groove for the napkins
Using a table saw or circular saw, create a groove in the wood plank that is deep enough to hold your napkins. The groove should be about 1/4 inch deep and 1/2 inch wide.
Step 3: Sand the wood
Use sandpaper to smooth out the edges and surface of the wood plank. You want to make sure the wood is free of any splinters or rough edges before moving on to the next step.
Step 4: Create a slot for the wooden stand
Using a router or wood chisel, create a slot in the back of the wood plank for the wooden stand to fit into. The slot should be about 1/4 inch deep and 1/2 inch wide. Make sure the slot is centered and level.
Step 5: Cut the wooden stand to size
Cut a piece of wood for the stand that is about 1 inch wide and 6 inches long. You can use a miter saw or hand saw to cut the wood to size.
Step 6: Sand the wooden stand
Use sandpaper to smooth out the edges and surface of the wooden stand. Make sure it is free of any splinters or rough edges.
Step 7: Glue the stand to the napkin holder
Apply wood glue to the slot in the back of the napkin holder and insert the wooden stand. Use clamps to hold it in place until the glue dries.
Step 8: Finish the napkin holder
Apply a finishing oil or stain to the napkin holder to protect the wood and enhance its natural beauty. Let it dry completely before using.
Step 9: Add napkins
Insert your napkins into the groove in the napkin holder and enjoy your new DIY creation!
Building a wooden napkin holder can be a fun and easy woodworking project, and it’s a great way to add some personality to your dining room or kitchen. With just a few basic tools and materials, you can create a functional and beautiful napkin holder that you can be proud of.