If you’re someone who likes to entertain, a spinning bar cabinet can be an excellent addition to your home. Not only does it provide a unique and interesting way to store your drinks, but it can also be a fun conversation starter when you have guests over.
In this article, we will go over the steps involved in building your very own spinning bar cabinet. This project is rated as intermediate to advanced level, so some woodworking experience is recommended. However, with patience, the right tools, and a little bit of elbow grease, anyone can build this fun and functional piece of furniture.
Materials Needed:
- ¾-inch plywood
- 1 x 2-inch boards
- 2 x 2-inch boards
- 1 x 3-inch boards
- 2 x 4-inch boards
- Piano hinge
- Lazy Susan bearing
- Wood glue
- Wood screws
- Saw
- Drill
- Sandpaper
- Paint or stain (optional)
Step 1: Cut the Plywood
Begin by cutting the plywood into the following pieces:
- Two pieces at 18 x 36 inches for the top and bottom of the cabinet
- Two pieces at 18 x 12 inches for the sides of the cabinet
- Two pieces at 36 x 12 inches for the front and back of the cabinet
- Two pieces at 18 x 18 inches for the top and bottom of the lazy Susan
Step 2: Assemble the Cabinet
Next, assemble the cabinet by attaching the sides to the top and bottom pieces using wood glue and screws. Then, attach the front and back pieces using the same method.
Step 3: Add the Shelves
Cut the 1 x 2-inch boards to the width of the cabinet, and then install them as shelves using wood glue and screws. The number and placement of shelves is up to you, but keep in mind that you will want to leave space for taller bottles.
Step 4: Add the Dividers
Cut the 1 x 3-inch boards to the height of the cabinet, and then install them as dividers using wood glue and screws. Again, the number and placement of dividers is up to you, but they will help keep your bottles organized.
Step 5: Add the Lazy Susan Bearing
Center the lazy Susan bearing on the bottom of the cabinet and attach it using screws.
Step 6: Add the Piano Hinge
Attach the piano hinge to the top of the cabinet using screws. Make sure that the hinge is centered and aligned with the lazy Susan bearing.
Step 7: Add the Top
Attach the top piece of plywood to the piano hinge using screws.
Step 8: Add the Bottom
Attach the bottom piece of plywood to the lazy Susan bearing using screws.
Step 9: Add the 2 x 2-inch Boards
Cut the 2 x 2-inch boards to the height of the cabinet, and then attach them to the corners using wood glue and screws. These will serve as legs for the cabinet.
Step 10: Sand and Finish
Sand all the rough edges and surfaces of the cabinet using sandpaper. If you want to paint or stain the cabinet, now is the time to do so. Allow the finish to dry completely before using the cabinet.
Step 11: Stock Your Cabinet and Enjoy!
Once your spinning bar cabinet is complete, it’s time to stock it with your favorite drinks and glasses. Give it a spin and impress your guests with this unique and functional piece of furniture.
Conclusion
Building a spinning bar cabinet can be a fun and challenging woodworking project for intermediate to advanced level woodworkers. By following the steps outlined in this article and using the right tools and materials, you can build a cabinet that will impress your guests and loved ones.